minimum tool requirements- Quick Reference Catalogs

Overhead/walk-under hoist or pit (motor vehicles 5500kg and less, first time registered vehicles, rebuilt vehicles).

Floor jack hydraulic/pneumatic and jack stands used for all other vehicles except motorcycles

• Features a specially engineered air motor for easy lifting and self-retracting spring return
• Ideal for lifting trucks, trailers, and other heavy-duty equipment
• Lightweight design is ideal for mobile repair service

Chamber mate or device for measuring air brake chambers

• Measures Type 6 to 36 chambers
• All stainless steel, laser cut, laser engraved

Digital decibel (sound) meter

• Measures 40 to 130dB on digital display
• 2dB accuracy with 0.1dB resolution
• Fast responding analog bar graph
• Records Max/Min values over time
• Auto power off and Max Hold function

Digital voltmeter (pressure fuel)

• Comes with test leads, protective holster, instructions and installed 9 volt battery
• 20 test ranges, 7 test functions
• 10 amp test range
• Continuity beeper
• Fully fuse protected

Gauges for fifth wheel king pin, jaws, and pintle hitch (Trailers 5000kg and up)

• To determine wear limits
• The latch gage bar measures the gap space between the top of the coupling hook and the closed latch
• If the 3/8" latch gage bar can pass between this region, then the latch components should be considered worn past safe limits and replaced

Standard issue domestic/metric hand tools applicable to vehicles and systems to be inspected

• Full polish chrome SAE and metric 1/4", 3/8" and 1/2" standard sockets, and 1/4" and 3/8" deep sockets
• 45-tooth quick release full polish chrome teardrop ratchets, with flush-mounted on/off lever
• Contains 12 point full polish long pattern combination wrenches and sockets
• Meets or exceeds ASME specifications

Optical headlight aiming device suitable for vehicles being inspected

• Fast and simple headlamp alignment
• Compact and portable
• Adjustable height
• Laser floor slope measurement
• Accurate and repeatable alignment
• Rotational mast

Wheel assembly removal device; in addition, facilities licensed 8200kg or over MUST have a device capable of lifting dual wheel assembly

• Lift arm adjusts inward and outward to handle different wheel combinations
• Provides extra lower access to easily position heavy wheel assemblies
• Leveling screw for precise alignment
• Full 7-3/4" ram lift
• Three large swivel casters provide maximum flexibility of movement

Hoisting or lifting devices

• Efficient pin-type post with four height adjustment positions
• Adjusts from 13-3/4" to 19-3/4"
• Large 3" x 3-7/8" saddle
• 10" x 10" square base secures and stabilizes load
• Meets ANSI standards for performance and safety

Gauges for fifth wheel king pin, jaws, and pintle hitch (Trailers 5000kg and up)

• To determine wear limits
• The latch gage bar measures the gap space between the top of the coupling hook and the closed latch
• If the 3/8" latch gage bar can pass between this region, then the latch components should be considered worn past safe limits and replaced

Tire pressure gauge

• Large bore chuck head service gauge
• Plated brass tube and 4 sided nylon indicator bar

Tire tread depth gauge (in 32nds of an inch and millimetres)

• Hand pocket clip

Steering/suspension free play measuring device(s) [KPI tools - dial indicators, Go-No-Go gauges or other tools specifically designed for the use]

• 0.001" to 1.0"
• Satin chrome plated case, back mounting
• Precision ground hand chrome plated stem, and contact point

Steering/suspension free play measuring device(s) [KPI tools - dial indicators, Go-No-Go gauges or other tools specifically designed for the use]

• Made of heavy-duty drop forged chrome vanadium steel
• (3) Forks in sizes: 11/16", 15/16" and 1-1/8"
• (1) Handle for use with manual hammer
• (1) Handle for use with air hammer

Steering/suspension free play measuring device(s) [KPI tools - dial indicators, Go-No-Go gauges or other tools specifically designed for the use]

• Designed to support dial indicators and other precision measuring devices
• Specially designed base with V groove, has two machined surfaces to allow clamping to straight and round surfaces
• 60kg holding strength

Torque wrench (appropriate for wheels/rims inspected)

• 200 - 750 ft-lb
• Robust construction gives accurate results to plus/minus 4% even in arduous working conditions
• Dual scale, NM, and FT.LB.
• The break-a-way action gives an unmistakable signal in the handle which can be seen and felt